AE-32 Punch Blocks
Below you will find all of the punch blocks for the AE-32 Audio Engine, including M66 and Krone blocks. Download the PDF files at https://logitek.link/AE32blocks
Recommended Ethernet Switches for AoIP
Generally speaking, any Gigabit switch will work for Dante, and any Gigabit switch that supports IGMP Snooping and an IGMP Querier will work for multicast (AES-67). We have begun to recommend the Cisco SG350 series of switches. They're managed ...
How To Set Up Cisco SG350 Series Switches for Logitek Audio over IP
Before You Begin Ensure that you have a Cisco SG350-series switch. This article only applies to Cisco SG350-series switches. Decide how IP Addresses will be managed. We strongly recommend using DHCP to assign addresses to your networked audio ...
How To Set Up Dante On The JetStream Plus
General Notes Connect Audio Net 1 on the JSP-DSP card to the Dante Network The default out of the box is that the Dante networking module is expecting to be issued an IP address by a DHCP server. All Dante devices need to be on the same subnet. If ...
How To Set Up HP ProCurve 2920 for Logitek AoIP
OverviewIt is critical that you enable IGMP Snooping and the IGMP Querier on your Ethernet switch for audio networking. These switch features properly manage the multicast audio packets that flow between devices. Without these features being turned ...